m5p3nc3r
457f054053
git-subtree-dir: lidar/sllidar_ros2 git-subtree-split: 34300099fadfc772965962dec837bf436706188f
248 lines
11 KiB
C++
248 lines
11 KiB
C++
/*
|
|
* RPLIDAR SDK
|
|
*
|
|
* Copyright (c) 2009 - 2014 RoboPeak Team
|
|
* http://www.robopeak.com
|
|
* Copyright (c) 2014 - 2019 Shanghai Slamtec Co., Ltd.
|
|
* http://www.slamtec.com
|
|
*
|
|
*/
|
|
/*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#pragma once
|
|
#include "sl_lidar_driver.h"
|
|
|
|
#ifndef __cplusplus
|
|
#error "The RPlidar SDK requires a C++ compiler to be built"
|
|
#endif
|
|
|
|
|
|
namespace rp { namespace standalone{ namespace rplidar {
|
|
using namespace sl;
|
|
typedef LidarScanMode RplidarScanMode;
|
|
|
|
enum {
|
|
DRIVER_TYPE_SERIALPORT = 0x0,
|
|
DRIVER_TYPE_TCP = 0x1,
|
|
DRIVER_TYPE_UDP = 0x2,
|
|
};
|
|
|
|
class RPlidarDriver {
|
|
public:
|
|
enum {
|
|
DEFAULT_TIMEOUT = 2000, //2000 ms
|
|
};
|
|
|
|
enum {
|
|
MAX_SCAN_NODES = 8192,
|
|
};
|
|
|
|
enum {
|
|
LEGACY_SAMPLE_DURATION = 476,
|
|
};
|
|
|
|
public:
|
|
/// Create an RPLIDAR Driver Instance
|
|
/// This interface should be invoked first before any other operations
|
|
///
|
|
/// \param drivertype the connection type used by the driver.
|
|
static RPlidarDriver * CreateDriver(_u32 drivertype = CHANNEL_TYPE_SERIALPORT);
|
|
|
|
|
|
RPlidarDriver(sl_u32 channelType);
|
|
|
|
/// Dispose the RPLIDAR Driver Instance specified by the drv parameter
|
|
/// Applications should invoke this interface when the driver instance is no longer used in order to free memory
|
|
static void DisposeDriver(RPlidarDriver * drv);
|
|
|
|
/// Open the specified serial port and connect to a target RPLIDAR device
|
|
///
|
|
/// \param port_path the device path of the serial port
|
|
/// e.g. on Windows, it may be com3 or \\.\com10
|
|
/// on Unix-Like OS, it may be /dev/ttyS1, /dev/ttyUSB2, etc
|
|
///
|
|
/// \param baudrate the baudrate used
|
|
/// For most RPLIDAR models, the baudrate should be set to 115200
|
|
///
|
|
/// \param flag other flags
|
|
/// Reserved for future use, always set to Zero
|
|
u_result connect(const char *path, _u32 portOrBaud, _u32 flag = 0);
|
|
|
|
/// Disconnect with the RPLIDAR and close the serial port
|
|
void disconnect();
|
|
|
|
/// Returns TRUE when the connection has been established
|
|
bool isConnected();
|
|
|
|
/// Ask the RPLIDAR core system to reset it self
|
|
/// The host system can use the Reset operation to help RPLIDAR escape the self-protection mode.
|
|
///
|
|
/// \param timeout The operation timeout value (in millisecond) for the serial port communication
|
|
u_result reset(_u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
u_result clearNetSerialRxCache() {
|
|
return RESULT_OK;
|
|
}
|
|
// FW1.24
|
|
/// Get all scan modes that supported by lidar
|
|
u_result getAllSupportedScanModes(std::vector<RplidarScanMode>& outModes, _u32 timeoutInMs = DEFAULT_TIMEOUT);
|
|
|
|
/// Get typical scan mode of lidar
|
|
u_result getTypicalScanMode(_u16& outMode, _u32 timeoutInMs = DEFAULT_TIMEOUT);
|
|
|
|
/// Start scan
|
|
///
|
|
/// \param force Force the core system to output scan data regardless whether the scanning motor is rotating or not.
|
|
/// \param useTypicalScan Use lidar's typical scan mode or use the compatibility mode (2k sps)
|
|
/// \param options Scan options (please use 0)
|
|
/// \param outUsedScanMode The scan mode selected by lidar
|
|
u_result startScan(bool force, bool useTypicalScan, _u32 options = 0, RplidarScanMode* outUsedScanMode = NULL);
|
|
|
|
/// Start scan in specific mode
|
|
///
|
|
/// \param force Force the core system to output scan data regardless whether the scanning motor is rotating or not.
|
|
/// \param scanMode The scan mode id (use getAllSupportedScanModes to get supported modes)
|
|
/// \param options Scan options (please use 0)
|
|
/// \param outUsedScanMode The scan mode selected by lidar
|
|
u_result startScanExpress(bool force, _u16 scanMode, _u32 options = 0, RplidarScanMode* outUsedScanMode = NULL, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
/// Retrieve the health status of the RPLIDAR
|
|
/// The host system can use this operation to check whether RPLIDAR is in the self-protection mode.
|
|
///
|
|
/// \param health The health status info returned from the RPLIDAR
|
|
///
|
|
/// \param timeout The operation timeout value (in millisecond) for the serial port communication
|
|
u_result getHealth(rplidar_response_device_health_t & health, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
/// Get the device information of the RPLIDAR include the serial number, firmware version, device model etc.
|
|
///
|
|
/// \param info The device information returned from the RPLIDAR
|
|
/// \param timeout The operation timeout value (in millisecond) for the serial port communication
|
|
u_result getDeviceInfo(rplidar_response_device_info_t & info, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
/// Set the RPLIDAR's motor pwm when using accessory board, currently valid for A2 only.
|
|
///
|
|
/// \param pwm The motor pwm value would like to set
|
|
u_result setMotorPWM(_u16 pwm);
|
|
|
|
/// Start RPLIDAR's motor when using accessory board
|
|
u_result startMotor();
|
|
|
|
/// Stop RPLIDAR's motor when using accessory board
|
|
u_result stopMotor();
|
|
|
|
/// Check whether the device support motor control.
|
|
/// Note: this API will disable grab.
|
|
///
|
|
/// \param support Return the result.
|
|
/// \param timeout The operation timeout value (in millisecond) for the serial port communication.
|
|
u_result checkMotorCtrlSupport(bool & support, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
///Set LPX and S2E series lidar's static IP address
|
|
///
|
|
/// \param conf Network parameter that LPX series lidar owned
|
|
/// \param timeout The operation timeout value (in millisecond) for the ethernet udp communication
|
|
u_result setLidarIpConf(const rplidar_ip_conf_t& conf, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
///Get LPX and S2E series lidar's static IP address
|
|
///
|
|
/// \param conf Network parameter that LPX series lidar owned
|
|
/// \param timeout The operation timeout value (in millisecond) for the ethernet udp communication
|
|
u_result getLidarIpConf(rplidar_ip_conf_t& conf, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
///Get LPX and S2E series lidar's MAC address
|
|
///
|
|
/// \param macAddrArray The device MAC information returned from the LPX series lidar
|
|
u_result getDeviceMacAddr(_u8* macAddrArray, _u32 timeoutInMs = DEFAULT_TIMEOUT);
|
|
|
|
/// Ask the RPLIDAR core system to stop the current scan operation and enter idle state. The background thread will be terminated
|
|
///
|
|
/// \param timeout The operation timeout value (in millisecond) for the serial port communication
|
|
u_result stop(_u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
/// Wait and grab a complete 0-360 degree scan data previously received.
|
|
/// The grabbed scan data returned by this interface always has the following charactistics:
|
|
///
|
|
/// 1) The first node of the grabbed data array (nodebuffer[0]) must be the first sample of a scan, i.e. the start_bit == 1
|
|
/// 2) All data nodes are belong to exactly ONE complete 360-degrees's scan
|
|
/// 3) Note, the angle data in one scan may not be ascending. You can use API ascendScanData to reorder the nodebuffer.
|
|
///
|
|
/// \param nodebuffer Buffer provided by the caller application to store the scan data
|
|
///
|
|
/// \param count The caller must initialize this parameter to set the max data count of the provided buffer (in unit of rplidar_response_measurement_node_t).
|
|
/// Once the interface returns, this parameter will store the actual received data count.
|
|
///
|
|
/// \param timeout Max duration allowed to wait for a complete scan data, nothing will be stored to the nodebuffer if a complete 360-degrees' scan data cannot to be ready timely.
|
|
///
|
|
/// The interface will return RESULT_OPERATION_TIMEOUT to indicate that no complete 360-degrees' scan can be retrieved withing the given timeout duration.
|
|
///
|
|
/// \The caller application can set the timeout value to Zero(0) to make this interface always returns immediately to achieve non-block operation.
|
|
u_result grabScanDataHq(rplidar_response_measurement_node_hq_t * nodebuffer, size_t & count, _u32 timeout = DEFAULT_TIMEOUT);
|
|
|
|
/// Ascending the scan data according to the angle value in the scan.
|
|
///
|
|
/// \param nodebuffer Buffer provided by the caller application to do the reorder. Should be retrived from the grabScanData
|
|
///
|
|
/// \param count The caller must initialize this parameter to set the max data count of the provided buffer (in unit of rplidar_response_measurement_node_t).
|
|
/// Once the interface returns, this parameter will store the actual received data count.
|
|
/// The interface will return RESULT_OPERATION_FAIL when all the scan data is invalid.
|
|
u_result ascendScanData(rplidar_response_measurement_node_hq_t * nodebuffer, size_t count);
|
|
|
|
/// Return received scan points even if it's not complete scan
|
|
///
|
|
/// \param nodebuffer Buffer provided by the caller application to store the scan data
|
|
///
|
|
/// \param count Once the interface returns, this parameter will store the actual received data count.
|
|
///
|
|
/// The interface will return RESULT_OPERATION_TIMEOUT to indicate that not even a single node can be retrieved since last call.
|
|
u_result getScanDataWithInterval(rplidar_response_measurement_node_t * nodebuffer, size_t & count);
|
|
|
|
/// Return received scan points even if it's not complete scan
|
|
///
|
|
/// \param nodebuffer Buffer provided by the caller application to store the scan data
|
|
///
|
|
/// \param count Once the interface returns, this parameter will store the actual received data count.
|
|
///
|
|
/// The interface will return RESULT_OPERATION_TIMEOUT to indicate that not even a single node can be retrieved since last call.
|
|
u_result getScanDataWithIntervalHq(rplidar_response_measurement_node_hq_t * nodebuffer, size_t & count);
|
|
|
|
|
|
virtual ~RPlidarDriver();
|
|
protected:
|
|
RPlidarDriver();
|
|
|
|
private:
|
|
sl_u32 _channelType;
|
|
IChannel* _channel;
|
|
ILidarDriver* _lidarDrv;
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
}}}
|